1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

how hard is it to change moldboard

Discussion in 'Sno-Way Discussion' started by rickram03, Feb 25, 2007.

  1. rickram03

    rickram03 Junior Member
    from NY
    Messages: 11

    how hard is it to get the bolts off the blade to change the mold board. can it be done with and air impact wrench?
  2. vwovw

    vwovw Senior Member
    Messages: 190

    yes. and yes its easy.
  3. oldmankent

    oldmankent PlowSite.com Addict
    Messages: 1,317

    It's easy. changing a lexan one is easier than a steel one, but they are both easy. You may need a couple clamps for a steel one if you do not remove the cutting edge.
  4. hydro_37

    hydro_37 PlowSite Veteran
    from iowa
    Messages: 3,790

    Some good C-Clamps on each end then loosen the cutting edge. put the new moldboard on, tighten everything and your done. :drinkup: