1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

How do I remove the tank from the power unit?

Discussion in 'Boss Plows Discussion' started by 1982atm, Jan 12, 2014.

  1. 1982atm

    1982atm Senior Member
    from indy
    Messages: 146

    I removed the 4 bolts and pulled it apart but once I got past the rubber o ring it seemed to get stuck.
     
  2. jhenderson9196

    jhenderson9196 Senior Member
    Messages: 615

    There is a screen on the pickup tube. You probably have to take the unit off the plow to get enough room to jockey the reservoir off.
     
  3. vincent

    vincent Senior Member
    Messages: 171

    You have to take the motor/tank out of the plow tower as one piece then separate the tank.

    Once you remove the 4 corner screws/bolts, then pull the tank off. Just give it a firm pull past the rubber seal and it will come off.
     
  4. 1982atm

    1982atm Senior Member
    from indy
    Messages: 146

    thanks I got it off.. I had already removed the hole assembly from the tower, just was scared to pull to hard.