1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

honda 621

Discussion in 'Test Post Forum' started by leegeyer, Aug 3, 2007.

  1. leegeyer

    leegeyer Junior Member
    from pa
    Messages: 1

    having a problem with my honda 621 blower. This has been an excellent machine year after year. It always starts on the first pull and is easy to use. Here is my dilemma.
    I have replaced the scraper bar several times. This year, however, the scraper bar seemed to have worn down before i realized it and now the metal edge that the bar fits over is pretty worn and the new scraper bar does not seat properly so the end result is that bar is not at the right angle and the blower does not glide easily.

    I do not want to trash the blower since the motor and augers are good. I am not having any success in locating just the lower housing that the augers fit in ,,

    Does anyone have any suggestions ....
  2. mcwlandscaping

    mcwlandscaping 2000 Club Member
    Messages: 2,557

    Can you get a pic of it to show what you mean?