1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Homesteader Question

Discussion in 'Fisher Engineering Discussion' started by jcald, Mar 4, 2006.

  1. jcald

    jcald Junior Member
    Messages: 17

    Does anyone on this site either sell or know a web site that sells parts for the Homesteader. I am missing bolts for my cutting blade on the 7'4" homesteader and I'm looking to buy the bolt kit that the fisher site shows but am having problems finding anyone that actually sells them online.:help:
  2. Crash935

    Crash935 2000 Club Member
    Messages: 2,377

    You can try sending a PM to Arc Burn (search members list) hes a fisher dealer there in new york.
  3. nsmilligan

    nsmilligan PlowSite.com Veteran
    Messages: 704

    I'm not sure about the Homesteader, but most Fishers use a 1/2"x 1 1/2 carriage bolt for the edges. Try your local NAPA dealer or a fastener dealer in your area, make sure they are Grade 5 bolts, a lot of carriage bolts are grade 2 and will break/shear. Take one of the bolts off and check the size.

  4. ashsupply

    ashsupply Junior Member
    from nh
    Messages: 26

    edge bolts

    we sell them over the phone, we are a distributor in NH. 1-888-314-0811. the bolt bag is part #27574 $10.29 plus UPS we ship daily
  5. mcwlandscaping

    mcwlandscaping 2000 Club Member
    Messages: 2,557

    where in NH are you located? do you also sell plows or are you parts only?