1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Hole size on A-frame

Discussion in 'Fisher Engineering Discussion' started by gtmustang00, Oct 3, 2011.

  1. gtmustang00

    gtmustang00 Senior Member
    from Berlin
    Messages: 747

    What size is the hole on the a-frame where the headgear mounts to? The 3 mounting holes for different height trucks to keep the a-frame level.
     
  2. gtmustang00

    gtmustang00 Senior Member
    from Berlin
    Messages: 747

    These holes are what i'm talking about. I'm in the process of modify my plow like this and i don't have the a-frame with me.

    [​IMG]
     
  3. sweetk30

    sweetk30 PlowSite.com Addict
    Messages: 1,588

    1" last i recall it should be.
     
  4. RepoMan207

    RepoMan207 PlowSite Fanatic
    from Maine
    Messages: 5,037

    Which plow is this for, I can tell you for certain.
     
  5. gtmustang00

    gtmustang00 Senior Member
    from Berlin
    Messages: 747

    9ft mm2 xblade. I believe it's a 04-05 blade. I'm not sure if the year though.
     
  6. RepoMan207

    RepoMan207 PlowSite Fanatic
    from Maine
    Messages: 5,037

    sweetk was right on, 1" step pin is used on that....so you'll obviously want to go slightly bigger.