1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

HLA Razor Snowpusher

Discussion in 'Commercial Snow Removal' started by SHAWZER, Mar 24, 2014.

  1. SHAWZER

    SHAWZER PlowSite.com Addict
    Messages: 1,151

    Just curious if anybody has one or seen one . Looks interesting with independent edges and dual trip.
     
  2. SnowGuy73

    SnowGuy73 PlowSite Fanatic
    Messages: 24,867

    I wasn't impressed when I saw them.
     
  3. schrader

    schrader PlowSite.com Addict
    Messages: 1,227

    I was wondering the same thing, everyone is talking about the metal pleas but not a word about the new HLA.
     
  4. SHAWZER

    SHAWZER PlowSite.com Addict
    Messages: 1,151

    I would post a picture of one if my laptop let me . HLA site says they are only 34 inches tall , good for backhoe , skidsteer or small tractor. :nod:
     
  5. SHAWZER

    SHAWZER PlowSite.com Addict
    Messages: 1,151

    Can I ask what did not impress you ?
     
  6. Mark Oomkes

    Mark Oomkes PlowSite Fanatic
    Messages: 10,868

    Maybe it resembles another brand too much.
     
  7. SHAWZER

    SHAWZER PlowSite.com Addict
    Messages: 1,151

    What brand ?
     
  8. ryde307

    ryde307 PlowSite Veteran
    Messages: 3,143

    Assuming he is talking about the Arctic Sectional. Which I would agree it is very similar.
     
  9. JD Dave

    JD Dave PlowSite Fanatic
    Messages: 11,046

    It doesn't look like a Plessis or Arctic. I wasn't very impressed when I looked at one. Next time I will take a few pictures.
     
  10. IDOCTORTREES

    IDOCTORTREES Senior Member
    from MONTANA
    Messages: 792

    It's on there web site
     
  11. Mark Oomkes

    Mark Oomkes PlowSite Fanatic
    Messages: 10,868

    The physical appearance and moldboard lifting up makes it appear similar. Other than that, I have no idea.
     
  12. SHAWZER

    SHAWZER PlowSite.com Addict
    Messages: 1,151

    If someone could post a picture of the Razor that would be great. :waving:
     
  13. Mark Oomkes

    Mark Oomkes PlowSite Fanatic
    Messages: 10,868

    Is there a Canadian form of Google?

    I had no idea what you were talking about, but Google found it for me.
     
  14. SHAWZER

    SHAWZER PlowSite.com Addict
    Messages: 1,151

    My laptop will not let me post pictures for some reason , that is why I am asking . :dizzy:
     
  15. JD Dave

    JD Dave PlowSite Fanatic
    Messages: 11,046

    The picture does look very similar your right. When I saw it in person it just looked like to many moving and wear parts. I'll let other people be the guinea pigs and then I'll jump on the band wagon later if it works out. If Horst used the much higher grade steel like Metal Plessis I'd also be more inclined to try one.
     
  16. Defcon 5

    Defcon 5 PlowSite.com Addict
    Messages: 1,686




    Your right....To many moving parts...Would it help if it was painted Green...:drinkup:
     
  17. Greenmtboy

    Greenmtboy Senior Member
    from Vermont
    Messages: 372

    ............

    razor_arrows.png

    header_razor.jpg

    48.jpg

    49.jpg
     
    Last edited: Mar 25, 2014
  18. SHAWZER

    SHAWZER PlowSite.com Addict
    Messages: 1,151

    Thank you for posting pictures . Wish I could find a better one showing the back of the pusher. :nod::drinkup:
     
  19. Greenmtboy

    Greenmtboy Senior Member
    from Vermont
    Messages: 372

    I did a little search and coud not find a good pic of the back, but what I can see of it, it looks very busy back there.
     
  20. Triple L

    Triple L PlowSite Fanatic
    from Canada
    Messages: 5,988

    The problem would be just like the picture, your out plowing and the section will get stuck up if it was tweeked in any way... The live edge still uses a solid moldboard and just springs as down pressure on the cutting edge... much simplier and much less moving parts