1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Hiniker Plow??

Discussion in 'Commercial Snow Removal' started by djd427, Jan 5, 2005.

  1. djd427

    djd427 Member
    from NEPA
    Messages: 98

    Just got done installing a 8.5 Hiniker plow on a 3500 chevy. Everything works good except,,,,,, it will not angle to the right?
    It angled to the left ,up and down but will not go back to the right. Any suggestions as what the problem could be? The dealer is closed and we are expecting a plowable snow overnight.
    Needless to say he should have bought an 810!!! HeHe
    Thanks for your help
    Dave
     
  2. QMVA

    QMVA Senior Member
    Messages: 431

    Make sure the plugs are in all the way and are all clean.
     
  3. djd427

    djd427 Member
    from NEPA
    Messages: 98

    QMVA,
    Got it to work,, Synner helped out. It was the power wire going to the soleniod. There are a few connections on the plow that are at best saying 50% as good as they should be. They are just simple push on connections,,(like a speaker wire), should have been studs with nuts in my opinion. We'll see tomorrow how it holds up.
    Thanks for your help.
    Dave