1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Highlight swap?

Discussion in 'Fisher Engineering Discussion' started by Clapper&Company, Aug 21, 2008.

  1. Clapper&Company

    Clapper&Company PlowSite Veteran
    from NE OHIO
    Messages: 4,413

    I got the MM1, can I put the newer light on it?
     
  2. NorwayAuto&Plow

    NorwayAuto&Plow Senior Member
    Messages: 160

    Yes but you need to do some modifications. Either make the bracket or buy the toyota headlight extension brackets. You basically need to just spred the lights out alittle bit because if if you don't the raise arm will hit the lights. Also, the new lights have two mounting bolts per light. The new Intensifier lights don't use a ground off the motor either. Any questions you have, don't be afraid to ask.
     
  3. Clapper&Company

    Clapper&Company PlowSite Veteran
    from NE OHIO
    Messages: 4,413

    Ok thanks, would the wireing be the same or would I need a new Harness?

    Thanks
    Clap
     
  4. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    If your running the old style relay harness Clap your gonna need to use the 29033 electrical adapter. Shouldn't need any other mods.
     
  5. Clapper&Company

    Clapper&Company PlowSite Veteran
    from NE OHIO
    Messages: 4,413

    OK when it comes to this, I will get with u guys on every thing I need

    Should be a week or two till ready to do this.

    the light hous is cracked so i need new one so why not buy new ones lol
     
  6. NorwayAuto&Plow

    NorwayAuto&Plow Senior Member
    Messages: 160

    I like the way you think!!!
     
  7. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    28800 Intensifier headlamp kit
    29033 adapter
    28330 light mounting bracket kit
     
  8. Clapper&Company

    Clapper&Company PlowSite Veteran
    from NE OHIO
    Messages: 4,413

    OK thanks B&B


    I know, I Like to think I think the right way LOL

    Fix it, right the first time, and 90% of the time I buy topline stuff
     
  9. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    Then what are you doing with all those yellow plows? :jester: :D
     
  10. toby4492

    toby4492 2000 Club Member
    Messages: 2,513

    That's gonna leave a mark. :cry:
     
  11. Clapper&Company

    Clapper&Company PlowSite Veteran
    from NE OHIO
    Messages: 4,413

    Well,

    That was all we have used for years, and have had very few problems,

    I now see the true light, and know we need to replace plows, and were do so as we update trucks
     
  12. i got a mm belt drivin plow and wanted to put the new fisher plow lights on it dont know how to go at it need some help
     
  13. Clapper&Company

    Clapper&Company PlowSite Veteran
    from NE OHIO
    Messages: 4,413

    Thats out of my book, B&B will know what is needed
     
  14. RepoMan207

    RepoMan207 PlowSite Fanatic
    from Maine
    Messages: 5,031

    Yup, they'll fit.