1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Help with whelen edge wiring problem

Discussion in 'Strobe Lighting' started by Jim Prill, Nov 30, 2010.

  1. Jim Prill

    Jim Prill Member
    from Zion Il
    Messages: 74

    I have a whelen edge 48"strobe lightbar with take downs, alley lights, corner strobes and front strobes. The problem I am having is this. I bench tested the light bar and everything works fine. install it on the truck and I only have take down lights. I havent hooked the bar to the switch panel yet I am just jumping the small wires off of the truck battery. In the past when bench testing there was one small wire that had 12v when the heavy red and black where hooked to 12v now I dont have the 12v anymore.

    Sorry about being long winded, I am just pulling my hair out.:help::help:
  2. SafetyLighting

    SafetyLighting Senior Member
    Messages: 601

    Where are the main power wires connected?