1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Help with new Meyer

Discussion in 'Meyer / Diamond Products Discussion' started by ohchit, Jan 21, 2008.

  1. ohchit

    ohchit Junior Member
    Messages: 29

    Just got a Meyer MDII which hole should I use on the truck side mount? Top or Bottom?Sorry it is an EZ mount not an MDII.
     
    Last edited: Jan 21, 2008
  2. f250man

    f250man PlowSite Veteran
    Messages: 3,124

    I do believe that there is only 2 hole per side and one uses the yellow pin and the other uses the blue pin. One takes the blade only and the other on takes the whole set up off. Then just make it level with the ground.
     
    Last edited: Jan 21, 2008
  3. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    Just FYI, if it has three vertical adjustment holes on the mount it's called an EZ Classic.

    Use whichever hole you need to for the A-frame to be parallel with the ground with the blade setting on the ground and whatever ballast you run in the back.