1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

help with installing new rubber on pro wings

Discussion in 'Commercial Snow Removal' started by goodlivin33, Dec 10, 2011.

  1. goodlivin33

    goodlivin33 Senior Member
    Messages: 100

    i am installing new rubber on my pro wings that are on a 7 1/2 foot western...i have seen where they are mounted overlapping the cutting edge and where they are mounted next to the cutting edge but not over lapping ...which is the best way in you're opinion?
     
  2. leon

    leon Senior Member
    Messages: 872

    rubber edges

    Your question is a bit missleading can you rephrase it?
     
  3. goodlivin33

    goodlivin33 Senior Member
    Messages: 100

    should the rubber on the bottom of the pro wing overlap the cutting edge or be next to the cutting edge?
     
  4. leon

    leon Senior Member
    Messages: 872

    plow etc.

    IT will be fine to overlap the rubber on the cutting edge as it will reduce the chance of snow being left in a small windrow.