1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Help w/ Western MVP

Discussion in 'Commercial Snow Removal' started by jiriki87, Oct 24, 2004.

  1. jiriki87

    jiriki87 Member
    Messages: 63

    Hooked up the 1/2 season Western MVP plow and the left wing will not function. Checked all the connections and they look good, but no go with the opperating functions. The right side operates fully. Any ideas, thoughts on getting this to work. It's been snowing and is going to continue snowing here in Stbt Springs CO.

    Thanks,
    Peter
     
  2. Crash935

    Crash935 2000 Club Member
    Messages: 2,377

    Peter, dont mean to be a pain, but the only way to trouble shoot a v plow is to have you go through all the functions and list exactly what it does on what function. Threre are 10 different functions going through 6 valves, so the more info the easier.
     
  3. ADLAWNCUTTERS

    ADLAWNCUTTERS Senior Member
    Messages: 212

    problem with vee blade

    i have a couple of them ,make sure the plug with the 12 pins is together real tight sometime the greace does't make good contact, then check the 12 plug and make sure none are broken,then go inside the truck and check the round plug and make sure the female plugs didn't push out the back . check the hand controler male pins for a broken one.these plows are build really tough it's most likely something small .you can buy the repair guide from the dealer for 15.00 .good luck
     
  4. ADLAWNCUTTERS

    ADLAWNCUTTERS Senior Member
    Messages: 212

    vee blade

    I'm sorry if that didn't do it take the black plastic covers where the coils are and make sure the wires didn't come off or broken corroded terminal.