1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Help Snowex 1875 DC-80 Vibrator

Discussion in 'Truck & Equipment Repair' started by stealthcore69, Dec 2, 2008.

  1. stealthcore69

    stealthcore69 Junior Member
    Messages: 1

    Can anyone please shed some light on these vibrators? i have 3 Snowex and all the vibrators stopped working for no apparent reason ive checked all wireing, there is no alarm sound just no vibration.

    Any help would be gretly appreciated

    Many thanks

    Stealth
     
  2. snow7899

    snow7899 Senior Member
    Messages: 238

    Disconnect the plug at the spreader and try to supply power to the vibrator directly. The unit I have was bad at the two wire plug going to the vibrator. I think the alarms are for the motors. Let me know how you make out.
     
  3. dirtmandan2

    dirtmandan2 Senior Member
    Messages: 275

    after mine sat all summer, when i tried it out had nothing, tapped on it a few times and its been running since. I agree w/ the alarms just for spinner and auger... could also be the switch..