1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Help: Sno way 22 won't work

Discussion in 'Sno-Way Discussion' started by dandan, Dec 22, 2009.

  1. dandan

    dandan Junior Member
    Messages: 2

    bought a used Sno way 22 this fall. it worked until ten days ago. tried screwdriver on 2 large posts on the solenoid. no noise, no movement, motor did not run. after tested, 5v in control. 12v in main power line. Anybody knows whats up? mine is wired control. thx
     
  2. s_melchi

    s_melchi Senior Member
    Messages: 183

    First call would be a dealer. Maybe Basher can diagnose it on here.

    I would take it in and have someone look it over.
     
  3. basher

    basher PlowSite Fanatic
    from 19707
    Messages: 8,992

    I'd guess a motor, dirty, broken or bad connections or a module, clean and check all your connectiions. But before you start throwing a couple hundred dollars in parts on have a experanced service guy look at it.:nod: