1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

HELP Please, MVP Plus, DOA!

Discussion in 'Western Plows Discussion' started by nps1, Jan 1, 2010.

  1. nps1

    nps1 Junior Member
    from Syr
    Messages: 20

    Long story short, the motor went on the plow, now after I replaced the motor I can not get the solenoid to operate at all. Put fresh solenoid on and still no luck.It is installed properly and I have power to it . (fuses are all good too) I know the plow will operate properly if I can get it to work because we jumped it a couple times and all functions worked fine. I hooked truck up another plow to test truck side and everything is good there, other plow worked perfect! Any help on what to look for or do next would be greatly appreciated.
  2. mikepeer

    mikepeer Junior Member
    from indiana
    Messages: 13

    might have fried your box on your blade........
  3. nps1

    nps1 Junior Member
    from Syr
    Messages: 20

    I will swap that out and see, Thanks
  4. twinman326

    twinman326 PlowSite.com Addict
    Messages: 1,683

    Is the motor grounded? Did you check all grounds?