1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

help me please

Discussion in 'Meyer / Diamond Products Discussion' started by 02tundra, Nov 23, 2008.

  1. 02tundra

    02tundra Junior Member
    Messages: 10

    just installed a meyer drive pro on an 02 tundra and with the plow not mounted to the truck (havent put the bracket on yet ) when i press the touch pad in any direction i can hear the solenoid and instantly the touch pad goes into overload any body got any ideas ?
     
  2. Clapper&Company

    Clapper&Company PlowSite Veteran
    from NE OHIO
    Messages: 4,413

    Bad controller,
    Bad harness
     
  3. dirtmandan2

    dirtmandan2 Senior Member
    Messages: 275

    is it wired the right way?
     
  4. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    The plow needs to be plugged into the truck or the touch pad see's the lack of resistance as an "overload", and will illuminate the overload light on the controller.

    So no fears yet... :waving:
     
  5. 02tundra

    02tundra Junior Member
    Messages: 10

    thank you b&b for the encouragement
     
  6. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    Just take your time and do a quality job and all should be good. :waving: