1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Help, I've got nothing

Discussion in 'Meyer / Diamond Products Discussion' started by bluemonster, Dec 14, 2012.

  1. bluemonster

    bluemonster Junior Member
    from CT
    Messages: 11

    Have a Meyers MDII with an E60H and a SAM membrane controller. Just hooked up today for the first time this season and the controller lights up but nothing will move. So there is power in the system but no movement and not even a noise like from a relay or anything. Where to start????
    New A coil last season and worked fine when put into storage this past spring.
     
  2. JDLipinski

    JDLipinski Junior Member
    Messages: 4

    Jumper across the solenoid, it should angle left. That will tell you if the motor and pump work. Make sure you have power to the small wire at the relay when trying to lift or angle. Could be as simple a a bad solenoid.
     
  3. bluemonster

    bluemonster Junior Member
    from CT
    Messages: 11

    Thanks. Actually working on it tonight and found a bad wire in the controller end of the plug under the dash. Did a creative fix and seems to Be working fine now. Thanks