1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

HELP!! 810 will not angle right

Discussion in 'Blizzard Plows Discussion' started by slade, Feb 27, 2013.

  1. slade

    slade Senior Member
    Messages: 142

    The blade will not angle right. the motor runs when I try to angle right, after I
    let off controller it jerks back to left a tiny bit (however I cant tell that it moved any to the right). If I push plow into snowbank I can get it straightened out but when I try to raise plow it angles left first then raises. Any help would be much appreciated.
    Thanks
     
  2. bliz&hinikerDLR

    bliz&hinikerDLR Senior Member
    Messages: 471

    I believe your valve for the angle left function is stuck open. Pull the valve, clean it, check operation and replace it if necessary.
     
  3. slade

    slade Senior Member
    Messages: 142

    Thank you for the reply, I will try it and let you know if it works.
     
  4. damian

    damian Senior Member
    Messages: 330

    try swaping valves and coils from left to right until you solve it.
     
  5. EliteSnow&Ice

    EliteSnow&Ice Senior Member
    Messages: 129

    what i find to happen most often, is not having my plug connection tight. it doesn't take much to make it not angle. I have 1 810 that we have to zip strip the plug to keep it tight to make it work.