1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

hello from a newb and old school elec/hydraulic questions

Discussion in 'Fisher Engineering Discussion' started by we287gn, Oct 19, 2012.

  1. we287gn

    we287gn Junior Member
    Messages: 3

    Hello all. Trying to get my feet wet with plowing I recently picked up an older setup suposedly from an 85 F250 4wd..
    I have an 85 F350 6.9 IDI
    It was advertised as a Fisher 8' Comercial plow..
    I expected to find a belt driven pump setup , instead included in the parts was a standalone fisher electric pump...
    My first thought was that someone had mixed and matched parts..
    Does it sound like this style belongs to the older F250 application?
    Finding a spot to stick it in the engine bay is going to be chalenging with two batteries .. I will be relocating some things I guess.
    I am assuming the brackets I have were from a gas job...
    Was hoping to stumble upon someone who has tinkered with these older setups..
    I have been to the fisher site and found some diagrams, but they dont show how the parts are installed on the actual vehicle.
    Start here with that I guess
    Thanks in advance for any help.
    Chris P.
     
  2. we287gn

    we287gn Junior Member
    Messages: 3

    This is the pump that came with the setup..

    pump.jpg