1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Height issue with Fisher MM1 with Insta act

Discussion in 'Fisher Engineering Discussion' started by sdcham1, Dec 27, 2013.

  1. sdcham1

    sdcham1 Junior Member
    from boston
    Messages: 6

    I just have new leaf springs with a helper spring installed on my truck. I just hooked up to my plow and now I think that the blade is to high at its current setting. How can I lower the A frame as it is in the center setting? I have never had to adjust this set up so I am just a little un sure any advice is much appreciated.

    Regards
    Scott
     
  2. 2006Sierra1500

    2006Sierra1500 PlowSite.com Addict
    Messages: 1,758

    Drop it to the top hole and check if the A-Frame is level. I believe its just two pins. If it still isn't level, you may need to modify your a-frame.
     
  3. sdcham1

    sdcham1 Junior Member
    from boston
    Messages: 6

    Thanks that what I thought but wanted to make sure.