1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Hb1 to hb5 lights

Discussion in 'Fisher Engineering Discussion' started by Truckermenchen, Dec 11, 2011.

  1. Truckermenchen

    Truckermenchen Junior Member
    Messages: 1

    I just got a 2004 F350 and am putting my MM1 from my 98 Dodge Ram on it. The Ram has HB1 lights and the Ford has HB5 lights. Do I need to replace the lamp connectors to fit the HB5? It is a plug in harness with relays, no isolation module. It seems pretty simple, but I can't figure it out for sure on the fisher website. Any help would be greatly appreciated.
     
  2. JFon101231

    JFon101231 Senior Member
    from CT
    Messages: 422

    Bringing this from the dead - looking to go the other way, from Ford to a Dodge. It must be possible like it is on the 3 plug setups, but not sure what to do on the relay side. Any input?
     
  3. Arc Burn

    Arc Burn PlowSite.com Addict
    Messages: 1,138

    Goto the fisher website upper right hand corner hit E-Search,from there search 8269. It's going to say Ford/mazda but shows the schematic for both HB1 and 5 and were to put the pins