1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

hazards turning on when using blinker

Discussion in 'Truck & Equipment Repair' started by G&G Maintenance, Oct 3, 2011.

  1. G&G Maintenance

    G&G Maintenance Junior Member
    Messages: 15

    hi guys, having an issue with with my 2004 Silverado, would appreciate some help or guidance on where to start.

    When I go to turn on my left blinker sometimes the hazards will turn on, it never happens with the right blinker.

    Could it be an issue with the plow wiring, remote start, or something wrong with the turn switch itself?
     
  2. 7441aaron

    7441aaron Junior Member
    Messages: 17

    Most likely the multifunction switch (turn signal switch) Lots of problems with those.
     
  3. ChiTahoe

    ChiTahoe Senior Member
    Messages: 143

    Totally agree, your hazard switch is on top of the steering column right?

    push the hazard switch from the side (to help make contact and see if that makes the turns work) if so definitely the multi function switch.
     
  4. G&G Maintenance

    G&G Maintenance Junior Member
    Messages: 15

    yeah the hazard switch is on the top, thanks for the help guys, i'll look into getting this replaced
     
  5. sweetk30

    sweetk30 PlowSite.com Addict
    Messages: 1,588

    there easy you can do it. just need the torq's socket not the bit's

    i think its a e4 bit if i recall correctly. and basic tools like screw driver. then 30 min or so of time.