1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Have plow signal lighs working, but no main plow lights.

Discussion in 'Western Plows Discussion' started by shep28, Nov 20, 2011.

  1. shep28

    shep28 Member
    Messages: 84

    I replaced my rusted out fenders on my 99 dodge ram and had to unhook everything from the fenders. Reinstalled everything and I have truck lights on and parking lights/amber on the plow, but no main plow lights. There were two wires that I did not label that I am not sure where they go coming from the plow. The first wire is a gray wire from the lights on the plow to the engine bay and the other is a orange w/ a black stripe wire from the harness
     
    Last edited: Nov 20, 2011
  2. mishnick

    mishnick 2000 Club Member
    Messages: 2,243

    What kind of plow is this? Straight blade or V? Unimount or Ultramount? Three plugs at the grill or two? Relays or isolation module to switch the lights? There are so many harnesses we need more detail to tell you what those wires are for.
     
  3. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    Gray is your left turn. Orange/Black goes to a good ground source.