1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Harness

Discussion in 'Fisher Engineering Discussion' started by unhcp, Jan 3, 2013.

  1. unhcp

    unhcp PlowSite.com Addict
    Messages: 1,244

    I have a ez V control harness that someone just cut the round 9 pin connector off, so I ordered a new connector but the wires don't have the metal connectors on the end. Does anyone know what size or what those end's need so I can push them in that round connector?
     
  2. RepoMan207

    RepoMan207 PlowSite Fanatic
    from Maine
    Messages: 5,033

    ahhhh, there was a thread on this....awhile ago, we found a supplier for them that was a fraction of the cost of Fisher. I'll try and dig it up tonight.
     
  3. unhcp

    unhcp PlowSite.com Addict
    Messages: 1,244

    I don't care about the price really, just even a part number might help me
     
  4. RepoMan207

    RepoMan207 PlowSite Fanatic
    from Maine
    Messages: 5,033

    k, let me dig into it.
     
  5. nealybird

    nealybird Senior Member
    Messages: 716

    22123 is the Western number . not sure if Fisher uses the same part number for them or not....
    yes, they do, I just checked..
     
  6. RepoMan207

    RepoMan207 PlowSite Fanatic
    from Maine
    Messages: 5,033

    and the winner is...........22123
     
  7. RepoMan207

    RepoMan207 PlowSite Fanatic
    from Maine
    Messages: 5,033

  8. unhcp

    unhcp PlowSite.com Addict
    Messages: 1,244

    awesome! fisher one is def a rip!
     
  9. RepoMan207

    RepoMan207 PlowSite Fanatic
    from Maine
    Messages: 5,033

    absolutely it is. They archived the old thread, I was able to find it through good old google thankfully.
     
  10. unhcp

    unhcp PlowSite.com Addict
    Messages: 1,244

    Thanks already ordered
     
  11. RepoMan207

    RepoMan207 PlowSite Fanatic
    from Maine
    Messages: 5,033

    No sweat bud
     
  12. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    I never updated you on this Ryan from way back when but those female pins are too small for the harness side wires. They're for 20-24G wire but the harness is 18. They can be made to work but it gets a bit messy.
     
  13. RepoMan207

    RepoMan207 PlowSite Fanatic
    from Maine
    Messages: 5,033

    Well crap, skin them down while stripping huh.?.?
     
  14. unhcp

    unhcp PlowSite.com Addict
    Messages: 1,244

    Ok, no biggie, can you find the correct ones?
     
  15. RepoMan207

    RepoMan207 PlowSite Fanatic
    from Maine
    Messages: 5,033

    Unless Mike has something in mind, they're probably going to be your best resource, give them a call in the morning and see what they have before they ship your order. I've had to strip down with the weather pak connectors from time to time, so It's not the end of the world if you have to go with them.
     
  16. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    Yes of course you can skin a few strands off in a pinch, but the pins that do fit the wires correctly are p/n 526432 so you don't have to.
     
  17. RepoMan207

    RepoMan207 PlowSite Fanatic
    from Maine
    Messages: 5,033

    There ya go.
     
  18. unhcp

    unhcp PlowSite.com Addict
    Messages: 1,244

    Awesome ordered !