1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Handheld part #

Discussion in 'Western Plows Discussion' started by purplehavoc, Nov 24, 2009.

  1. purplehavoc

    purplehavoc Member
    Messages: 97

    Want to swap out the joystick for a handheld on my unimount.
    It is just a standard straight blade.
    Does anyone know if part #56462 will work for me?
    Will i need to do anything else or just plug and play?
    Thanks.
     
  2. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    P/n is correct. On the older Uni's you have verify which revision harness you have as some require a small ground wire mod in the harness when going to the handheld controller..

    Quick way to tell if the mod is needed is on the underhood solenoid. If you have two orange/black wires on one small terminal no ground mods are needed, it's plug and play.

    If you only have a single orange/black then you need a minor ground wire mod. Paperwork in the box will show you what you need to know.
     
  3. purplehavoc

    purplehavoc Member
    Messages: 97

    Thanks,
    Just wanted to be sure before i order up the controller.