1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

hand held control?

Discussion in 'Western Plows Discussion' started by woodsman, Nov 3, 2010.

  1. woodsman

    woodsman Senior Member
    Messages: 119

    I have a western unimount and have the fixed controller mounted to the dash. Can i buy a hand held unit for this plow and is it hard to install.

    Thanks Jim
     
  2. no lead

    no lead PlowSite.com Addict
    Messages: 1,308

    yes and no. plug it in.
     
  3. PabstBlueRibbon

    PabstBlueRibbon Senior Member
    Messages: 733

    You can run the hand held, I do, however you need to modify the harness. Buy the controller and look at the directions it tells you how to modify it.
     
  4. Mxrider069

    Mxrider069 Member
    Messages: 85

    as long as you have the 6 pin white plug on your control harness it WILL plug right in and operate your blade
     
  5. PabstBlueRibbon

    PabstBlueRibbon Senior Member
    Messages: 733

    wrong! and the uni-mount and ultra mound have the same 6 pin white plug
     
  6. Crash935

    Crash935 2000 Club Member
    Messages: 2,377


    Wrong, depends on what revision control harness you have. Later revisions require no modification.
     
  7. PabstBlueRibbon

    PabstBlueRibbon Senior Member
    Messages: 733

    I'm Wrong! your correct, earlier versions need you to modify it. next time ill ask for what year the harness is!
     
  8. woodsman

    woodsman Senior Member
    Messages: 119

    Thanks everyone.