1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Got my mower thrown together

Discussion in 'Equipment, Tools & Vehicle Pictures' started by SNOWLORD, Apr 25, 2010.

  1. SNOWLORD

    SNOWLORD Senior Member
    from MN
    Messages: 610

    We finish mow 9 acres between the farm and our new house and Im not very patient by nature so this is what I came up with. I already had the toolcat. It sure is nice with the 4wheel steer and the a/c cab. This will be the second season with no problems yet. It covers about 18ft and each deck can float on its own, and leaves no grass between decks no matter how sharp you turn.
    [​IMG]
     
  2. BlackIrish

    BlackIrish Senior Member
    Messages: 890

    Pretty slick.
    I wish I had the time to trick out my toolcat the same way.
    I have less than an acre to trim so its probably overkill in my case.
    Would be fun tho.
     
  3. GMCHD plower

    GMCHD plower PlowSite.com Addict
    Messages: 1,819

    THATS SWEET! Good job!
     
  4. JD Dave

    JD Dave PlowSite Fanatic
    Messages: 11,045

    Very nice.
     
  5. redneck farmer

    redneck farmer Senior Member
    Messages: 192

    slick set up. did you do all the fabrication work?
     
  6. jkiser96

    jkiser96 Senior Member
    Messages: 401

    Nice setup. I also noticed a huge log splitter in the background. That thing is a monster.
     
  7. SNOWLORD

    SNOWLORD Senior Member
    from MN
    Messages: 610

    Yes the trickiest part was not leaving any grass when turning tightly, and allowing everything to flex to follow contours of the land. It cut my mowing time about a third from a 72" zero turn which has now become the trim mower.
     
  8. mossman381

    mossman381 2000 Club Member
    Messages: 2,410

    That should get the job done :D
     
  9. flatlander42

    flatlander42 Senior Member
    Messages: 421

    BUMP!!! That is sweet! Do you have any videos?