1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Got My MD68!

Discussion in 'SnowDogg Snow Plows' started by Max Wedge, Nov 25, 2009.

  1. Max Wedge

    Max Wedge Member
    Messages: 38

    Installed on my 04 TJ today! I hate to admit it, but I kind of want it to snow....
    [​IMG]
     
  2. f250man

    f250man PlowSite Veteran
    Messages: 3,124

    Looks great

    I keep kicking myself for not getting a Dogg
     
  3. Sydenstricker Landscaping

    Sydenstricker Landscaping PlowSite Veteran
    Messages: 3,882

    Looks like a nice plow rig!!! Good luck this season!!
     
  4. Max Wedge

    Max Wedge Member
    Messages: 38

    A few more shots of the new dogg....for those thinking of getting one.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  5. Max Wedge

    Max Wedge Member
    Messages: 38

    A couple more...

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    Price was great I think...$2840 installed, plus Michigan sales tax.
     
  6. 1fast432

    1fast432 Member
    Messages: 32

    Did you get it from cannon equipment in Shelby twp. If so did you deal with Ed or Tony?
     
  7. Max Wedge

    Max Wedge Member
    Messages: 38

    Tony-turns out he is my neighbor!
     
  8. leepotter

    leepotter Senior Member
    Messages: 122

    The mount dosent give you much clearance. Nice install though.
     
  9. MOWBIZZ

    MOWBIZZ Senior Member
    Messages: 500

    Wow...that looks low...how many inches to the bottom of mount from the ground??
     
  10. Max Wedge

    Max Wedge Member
    Messages: 38

    About 6.5 inches, with the plow mounted, 30 X9.50 tires at 30 psi approximately. Tire pressure is a little low, I imagine. No lift, stock springs. I suppose you trim some off the bottom bracket if you cared to.

    I will measure again after I take the plow off if you want.
     
  11. Montosi82

    Montosi82 Member
    Messages: 62

    Hey I'm thinking about a snowdogg for my jeep. Could you take a picture of the truckside mount when the plow is off? Jeep looks great. Good luck this year.

    Thanks
     
  12. Max Wedge

    Max Wedge Member
    Messages: 38

    Sure can- I'll have it off today or Monday, and I'll snap some pics.
     
  13. Andy64

    Andy64 Junior Member
    from NNJ
    Messages: 18

    looks good, I would also like to see pics of the mount without the plow on

    Thanks
     
  14. Max Wedge

    Max Wedge Member
    Messages: 38

    Hot off the camera

    by request....

    [​IMG]

    [​IMG]

    [​IMG]

    Sorry about the night shots, but this should give you a good idea.
     
  15. Montosi82

    Montosi82 Member
    Messages: 62

    Thanks for posting those pics of the jeep without the plow.
     
  16. leepotter

    leepotter Senior Member
    Messages: 122

    Check ur front differential for a leak. Could be cover gasket or pinion seal.
     
  17. Max Wedge

    Max Wedge Member
    Messages: 38

    Thanks-good eye! yes, it is the pinion seal that is leaking, it is on my list of things to do.:nod:
     
  18. P&M Landscaping

    P&M Landscaping Senior Member
    Messages: 786

    Man that mount looks really low... Almost like you could plow with out the plow! Is that really where they set it up? My Boss mount sits alot higher than that
     
  19. Nelsen

    Nelsen Member
    Messages: 69

    Agreed! I have a MD75 on my Chevy and the setup is low as well, bout 10 inches. And I bang on EVERYTHING even after I have the torsion bars raised.

    You really might want to have that front real stiff and pay vry good attention to where you're plowing....a high curb alone will hammer that setup.