1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Fuse?

Discussion in 'Fisher Engineering Discussion' started by caboman, Feb 7, 2015.

  1. caboman

    caboman Junior Member
    Messages: 17

    having trouble finding the 7.5amp fuse for the controller?
     
  2. kimber750

    kimber750 PlowSite Veteran
    Messages: 3,700

    Need more info. When does it blow? Check wire for chaffing. Try another control. Check for shorts out at the pump. Check coils. Check solenoid.
     
  3. caboman

    caboman Junior Member
    Messages: 17

    I don't have any power to the controller, so the manual says to check the 7.5amp fuse I'm having trouble finding it. I tried another controller same thing no power.
     
  4. kimber750

    kimber750 PlowSite Veteran
    Messages: 3,700

    Ok, find the module out under the hood. It will be just off that.
     
  5. caboman

    caboman Junior Member
    Messages: 17

    thanks a lot!!!! I will take a look at it this morning
     
  6. NHresident

    NHresident Senior Member
    Messages: 285

    if u have a 4 port module the fuse which is CAPPED is on the control cable port 1 of the module a bout a foot dwn from the module IF u have a 3 port module its about half way down on the headlight cable where the #1 control cable attaches via an adaptor
     
  7. caboman

    caboman Junior Member
    Messages: 17

    I saw that thing but didn't think it was it, Man I thank you guys for the help!!!!!