1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

front end problems

Discussion in 'Ram Trucks' started by gntbik, Feb 5, 2005.

  1. gntbik

    gntbik Junior Member
    from ny
    Messages: 7

    i have a 1985 dodge and i need to change the front rotors and they are compresed over the hub so dose anyone know what tool i need to pull the rotrs off and what tool to press them back on with. and where i can bye the tools or is there any place to rent the tools and bring them back.
     
  2. ksland

    ksland Senior Member
    from ma
    Messages: 420

    You need to knock the wheel studs out, they hold the hub to the rotor. Use a brass punch so you don't damage the threads.
     
  3. John W

    John W Junior Member
    Messages: 13

    The last time I did one I used an air chisel with a pointed tip. The studs should have a small indentation in the center. This is a good time to replace any with problem threads.

    '00 2500 CTD 8.5 Ultramount MVP
    '90 W250 CTD 9.0 UniMount
     
  4. Firebrands

    Firebrands Junior Member
    Messages: 23

    A shop press works like a champ as well. Your ears won't be ringing when you are done.