1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Front and rear diffs from Ford Super Duty complete

Discussion in 'Used Plowing and Truck Equipment Forum' started by got-h2o, May 30, 2010.

  1. got-h2o

    got-h2o 2000 Club Member
    Messages: 2,439

    As it states, they come basically with everything to bolt them in. All steering, brackets, track bar, blocker beam, trailing arm, brake lines, springs, brakes, rotors, rear calipers, etc. Came out of a 2003 F250 Powerstroke with 60k miles, and new ball joints with about 200 miles. Locking hub design.

    $1,200 takes the pair. Firm price, just one would cost this in the bone yard, plus the front is ideal for SAS conversions.
     
    Last edited: May 30, 2010
  2. got-h2o

    got-h2o 2000 Club Member
    Messages: 2,439

  3. got-h2o

    got-h2o 2000 Club Member
    Messages: 2,439

    Still have, make offer on the pair
     
  4. got-h2o

    got-h2o 2000 Club Member
    Messages: 2,439

    Bump, nice pair of diffs!
     
  5. towpro570

    towpro570 Senior Member
    Messages: 241

    if i had more time i would buy the front rear to put in my 92 rollback to make 4x4
     
  6. got-h2o

    got-h2o 2000 Club Member
    Messages: 2,439

    Would make a perfect donor for the swap. A manual t case, a driveshaft and you're set! :)
     
  7. towpro570

    towpro570 Senior Member
    Messages: 241

    yep only prob is the E brake its on back of trans 92 f super duty 7.3 5 spd
     
  8. Kelsey

    Kelsey Member
    Messages: 38

    What gears? Limited slip or open?
     
  9. got-h2o

    got-h2o 2000 Club Member
    Messages: 2,439

    90% sure its a 3:73 and being it had a PS and rear discs, I assume limited slip, but not sure. I'd imagine no way to know without pulling the cover. I will if you're seriously interested.
     
  10. wkahler

    wkahler Senior Member
    Messages: 250

    What about the wheels in the pictures, do you have all 4 of them? Where they off the same truck, will they fit a 2001 SD looks like the same botl pattern.
     
  11. got-h2o

    got-h2o 2000 Club Member
    Messages: 2,439

    They were off the same truck, but I bought them with the package for my 04. They're already mounted up........sorry.
     
  12. Wicked500R

    Wicked500R Senior Member
    Messages: 394

    The front axle is highly sought after for lifted 4x4's, rock crawlers, etc. with the high pinion !
    If advertised elsewhere, it'll prolly go like a hot cake !