1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Ford 5.4 manifolds

Discussion in 'Ford Trucks' started by 4700dan, Nov 9, 2012.

  1. 4700dan

    4700dan Senior Member
    from Ohio
    Messages: 329

    Can anyone tell me if Ford had a recall on the exhaust manifolds for the 5.4 motors, I replaced the ones on my 08' just about 6 months ago and now my 09' needs them but now I;m looking at another 1200.00, I think Ford should cover these. :yow!:
     
  2. MickiRig1

    MickiRig1 PlowSite Veteran
    Messages: 3,617

  3. 4700dan

    4700dan Senior Member
    from Ohio
    Messages: 329

  4. Morrissey snow removal

    Morrissey snow removal PlowSite.com Addict
    Messages: 1,799

    they do suck when i had mine i did one side myself pita good luck
     
  5. Ultra Duty

    Ultra Duty Member
    from NE OHIO
    Messages: 65

    $1200 seems steep! take it to a local garage. the manifolds are like $150 a piece for a/m and then get stud kit, $100, most shops should replace them for 150-200 a side.
     
  6. 4700dan

    4700dan Senior Member
    from Ohio
    Messages: 329

    Thanks everyone for the info I have found a garage that is charging 750.00 out the door for both sides payup
     
  7. brad96z28

    brad96z28 PlowSite.com Addict
    Messages: 1,526

    Thay are fairly easy to do. Just did a v 10 6 out of the 10 studs had rotted off on a 2008. Done a ton of the 5.4s I only charge a few hours a side max most are 2 to 3 hrs a side Just hope they dont use pos aftermarket manifolds if you need them.
     
    Last edited: Nov 13, 2012
  8. tawilson

    tawilson Senior Member
    Messages: 218

    Aren't they covered under the emissions warranty?
     
  9. ducaticorse

    ducaticorse PlowSite.com Addict
    from we
    Messages: 1,426

    Just did mine last week. Both sides. All but one stud broke. And I wouldnt call it "easy" by any means. More like a raging pain in the ass.... Now my 7.3 needs them too. FML.