1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

flushing pump

Discussion in 'Western Plows Discussion' started by dieselpusher, Dec 17, 2006.

  1. dieselpusher

    dieselpusher Senior Member
    Messages: 208

    hey tomrrow im gonna change my hoses and flush the fluid out of the pump

    how do i go about this process
    thanks
    Sean
     
  2. doh

    doh Senior Member
    Messages: 252

    hey;

    I would lift the blade alittle off the ground, remove the hoses to both cylinders, swing the blade both waysby hand.

    Replace the hoses, There is an allen key plug under the pump by the lower pin, remove the plug, drop the plow and push down on the lift arm. let it drain, replace plug and refill, run the blade back and forth and recheck the fluid level.
     
  3. dieselpusher

    dieselpusher Senior Member
    Messages: 208

    ill try that but i was told to take the hoses off and pump the fluid out the hoses