1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Fluid change

Discussion in 'Fisher Engineering Discussion' started by 512high, Nov 27, 2011.

  1. 512high

    512high Senior Member
    Messages: 113

    Hi All,
    I have 2 Fisher snow plows, 8ft. and a 6'9", both are minute mount 1st. generation. I usually send the plows out every other year for fluid change and filter screen change. This year i would like to try myself. a few questions
    1.) How important is it that the screen/filter be changed? some people have said a pain to change those.

    2.)8ft. may have a weeping issue lower hydrulic piston , i tried tighten packing nut, watching it.

    3.)if i have to change that hyradluic piston(not the one that lifts the plow up) one that makes it angle right etc. best way to do this?