1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Fisher XLS

Discussion in 'Fisher Engineering Discussion' started by adorler, Sep 23, 2013.

  1. adorler

    adorler Junior Member
    Messages: 15

    Hi all, just hooked up my Fisher XLS to make sure its working fine...Well one headlight is out...I removed it and swapped it with the one that does work, but nothing. So the bulb is fine, I checked the wiring, looks good. Pins look good too..Any ideas??
     
  2. gtmustang00

    gtmustang00 Senior Member
    from Berlin
    Messages: 747

    Try putting some dielectric grease in the plugs. Sometimes they don't make a good connection.
     
  3. dieselss

    dieselss PlowSite Fanatic
    Messages: 10,977

    hows the socket? hows the wiring behind the socket?
     
  4. adorler

    adorler Junior Member
    Messages: 15

    did both, still nothing. I lathered it with grease and put a working bulb in the socket and still nothing....Its a pretty new plow too.....
     
  5. gtmustang00

    gtmustang00 Senior Member
    from Berlin
    Messages: 747

    I guess you should sell the plow...to me :)
     
  6. dieselss

    dieselss PlowSite Fanatic
    Messages: 10,977

    Ok. Well then you need to break out the test light and start cking for pwr and gnd
     
  7. adorler

    adorler Junior Member
    Messages: 15

    Should i start with the pins in the harness...the marker light(yellow) works just not the main light....
     
  8. dieselss

    dieselss PlowSite Fanatic
    Messages: 10,977

    Well I would ck pwr and gnd at the socket and work my way back
    Also ck.the high beam pwr as well