1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

fisher xlis driver side wing wont go in

Discussion in 'Fisher Engineering Discussion' started by nassa, Apr 2, 2014.

  1. nassa

    nassa Junior Member
    Messages: 28

    Hello the driver side wing on on the fisher xls goes out no problem and into the scope mode but when i bring in it only come have way in, im sure something is stuck in there, just like to know if there a write up on how to remove the wing my self thanks
     
  2. Defcon 5

    Defcon 5 PlowSite.com Addict
    Messages: 1,677




    Is there crap in the slide box.....Try power washing out the inside of the slidebox before you take it all apart....:drinkup:
     
  3. cat10

    cat10 Senior Member
    Messages: 214

    I had the problem it wouldn't go out worked fine for the whole storm till the last lot then it started to work 5 mins later no idea wat it was
     
  4. dieselss

    dieselss PlowSite Fanatic
    Messages: 10,960

    Look inside as said. Also look at the wing and moldboard for bent metal. They usual bend at the top corner.
     
  5. cat10

    cat10 Senior Member
    Messages: 214

    ya I bent one side this season in the begin