1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

fisher wiring

Discussion in 'Fisher Engineering Discussion' started by LoudnLifted88, Dec 15, 2011.

  1. LoudnLifted88

    LoudnLifted88 Member
    Messages: 39

    my buddy just blew the motor in his plow truck and needs to put the plow on his duramax we know the pushplates are different but what else would he need?

    blown truck

    1998 gmc k1500

    duramax

    03 chevy 2500hd

    plow

    fisher mm1 electric over hydraulic so the pump is on the plow frame.

    what different harness would we need or is it all the same?
     
  2. kimber750

    kimber750 PlowSite Veteran
    Messages: 3,574

    Not positive, but pretty sure he will need truck side light harness.
     
  3. LoudnLifted88

    LoudnLifted88 Member
    Messages: 39

    that what i thought
     
  4. RepoMan207

    RepoMan207 PlowSite Fanatic
    from Maine
    Messages: 5,031

    Is it a 3 plug ISO setup or 2 plug Relay?
     
  5. LoudnLifted88

    LoudnLifted88 Member
    Messages: 39

    all i kno is its got 2 plugs to plug into the plow
     
  6. RepoMan207

    RepoMan207 PlowSite Fanatic
    from Maine
    Messages: 5,031

    Then it's a relay setup and will work fine. If it were me I would buy an ISO setup and wire the truck accordingly. The mounts needed are 7169.
     
    Last edited: Dec 15, 2011