1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Fisher Snow Plow Question

Discussion in 'Commercial Snow Removal' started by BJH Snow, Sep 14, 2004.

  1. BJH Snow

    BJH Snow Senior Member
    Messages: 142

    I have an older Fisher 8' HD plow that on a rare occasion will stick in the position that I have the blade in. Usually it happens when I have the blade turned towards the right. When this happens I hop out of the truck, shake the blade a little and get back in and it again will work fine (for a while). Does anyone have any recommendations? :salute:

    Bryan
     
  2. Arc Burn

    Arc Burn PlowSite.com Addict
    Messages: 1,138

    Check the slack in your excess lift chain,it often hangs below the A-frame and gets pinched between the blade and the A-frame and will stop it from moving,happens quite often,if this is the case,use a bunjy cord to take up some of the slack as it's there for a reason,you dont want the chain tight,try that first.