1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Fisher Push Plates

Discussion in 'Fisher Engineering Discussion' started by willis923, Mar 21, 2014.

  1. willis923

    willis923 Junior Member
    Messages: 3

    howdy yall, new here. question about push plates, cant seem to find any info on them.
    ive got a set of push plates off of a 2004 dodge ram 2500 HD. it had the 5.9 "hemi" magnum in it. last spring, the transmission went. shifted from 5th to 2nd doing 65 down a state road. send a rod right through the block. anyway, ive got the plates off that. i just found a 98 dodge ram 2500, 5.9 liter magnum. will the 2004's push plates fit? or do i have to get new ones?

    the 98 is gonna be my first truck (im 17) and its at the end of the winter, so not too big of a deal, but just wanna know what i should be expecting. after the 04 blew up, my stepdad got a 99' F250, came with push plates so he was able to keep his 9 foot fisher HD. the 2004 and 9foot plow originally came together
     
  2. 2006Sierra1500

    2006Sierra1500 PlowSite.com Addict
    Messages: 1,758

    7170-2 should be what you have. Your 98 needs 7157, so now they won't fit.
     
  3. willis923

    willis923 Junior Member
    Messages: 3

    ahhh dang. how much you think they'd be worth? 150, 200?
     
  4. peteo1

    peteo1 PlowSite.com Addict
    Messages: 1,659

    They usually sell on ebay for $250-$350 or so. New I think they're around $500. Start a thread in the used equipment section, I'm sure someone around here might need them or knows someone who could use them.
     
  5. 2006Sierra1500

    2006Sierra1500 PlowSite.com Addict
    Messages: 1,758

    Could always trade too