1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

fisher push plates

Discussion in 'Equipment, Tools & Vehicle Pictures' started by serafii, Aug 29, 2011.

  1. serafii

    serafii Senior Member
    Messages: 285

    i just purchased an 8' mm1 with the insta act 3 plug kit for my 99 chevy 2500 diesel OBS. i tried putting the push plates on today but something doesnt seem right. im starting to think the push plates arent for my truck. would anyone have a picture of the pushplates mounted on the same truck? thanks.

    i tried searching on fishers website to see if my pushplates are the right ones but i cant seem to find it.

    IMG-20110829-00044.jpg

    IMG-20110829-00042.jpg
     
  2. 2COR517

    2COR517 PlowSite Fanatic
    Messages: 7,115

    Those don't fit your truck. I don't know what they fit though, sorry.
     
  3. serafii

    serafii Senior Member
    Messages: 285

    Yah I just checked the push plates on my 97 3500 drw and they're not the same at all. Is it safe to cut and mod them to fit? New ones are like 700$
     
  4. 2005_Sierra

    2005_Sierra Senior Member
    Messages: 346

    i'd say its safe to if you build them to fit, if you use heavy enough materials and gets good strong welds


    Here's mine
    [​IMG]
    [​IMG]
     
  5. randomb0b123

    randomb0b123 PlowSite.com Addict
    from america
    Messages: 1,278

    dont solder them on with pieces of conduit like you would do if you were to modify a plow mount on a ford ranger
     
  6. serafii

    serafii Senior Member
    Messages: 285

    finally figured out how to use fishers parts section. the push plates i have are for a 99-02 chevy/gmc 1500-3500. part number 7161. i need part number 7125. i guess these will go for sale
     
  7. Willman940

    Willman940 Senior Member
    Messages: 325

    .......................Popcorn anyone? :popcorn:
     
  8. 2COR517

    2COR517 PlowSite Fanatic
    Messages: 7,115

    That's the way to do it. Might be able to do an even swap.
     
  9. Tracy89

    Tracy89 Senior Member
    from Maine
    Messages: 167

    Do you still have these? Im not 100% sure but I believe that I might have the plates that you need for yours and these may be the ones that I need for mine...
     
  10. Banksy

    Banksy PlowSite Veteran
    Messages: 3,113

    "08-29-2011"

    I hope he found the right ones by now. Haha.
     
  11. Tracy89

    Tracy89 Senior Member
    from Maine
    Messages: 167

    Right.. I guess maybe it would have helped if I looked at the date wouldn't it..
     
  12. newyorkplower

    newyorkplower Junior Member
    Messages: 3

    Those look like push plates that go on a '03 to '07 2500hd. That is what i have and looks very close to the ones that i have.
     
  13. Tracy89

    Tracy89 Senior Member
    from Maine
    Messages: 167

    On another note i guess.. I need a set of these if anyone has a pair they are looking to ditch..