1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Fisher plow parts needed Please help!!!

Discussion in 'Fisher Engineering Discussion' started by berlincam86, Feb 29, 2008.

  1. berlincam86

    berlincam86 Member
    Messages: 59

    I just got a older belt driven fisher minute mount plow. It was off a 90 chevy 3500 with a 454. The brackets that I have do not work with my truck. I have a 95 chevy 2500 with a 350. If anyone has a setup like this please let me know. I need the pump bracket(8215), Saddle bracket(8210), Valve plate brace(long)(20366), Valve plate brace(short)(20367),Drive sheave(20056), Drive sheave bushing(20057), 1 Shock mount(5529), Cable support brace(20368), And the pump bracket brace(7009). I will pay for these items. I need them badly Please help me out. Thank you.
     
  2. BigDave12768

    BigDave12768 PlowSite.com Addict
    Messages: 1,446

    Search craigslist in New england area I saw lots of old Speed cast parts
     
  3. berlincam86

    berlincam86 Member
    Messages: 59

    Where are the new england posts?
     
  4. Gicon

    Gicon Senior Member
    from MA
    Messages: 989

    Did you try Central Parts Warehouse? I dont know how far back they go with parts for old Fishers.....
     
  5. berlincam86

    berlincam86 Member
    Messages: 59

    nope couldn't find nothin there.
     
  6. badger

    badger Junior Member
    from Maine
    Messages: 13

    is your setup the one with the pump seperated from the res tank ?
     
  7. berlincam86

    berlincam86 Member
    Messages: 59

    I actually got the pump bracket now. It was the one where the pump and res are the same. I do need the drive pully that mounts to the crank pulley does anyone have that?
     
  8. badger

    badger Junior Member
    from Maine
    Messages: 13

    I do have that pulley i just have to find it I am going back to the shop tonite I will look for it and report back
     
  9. berlincam86

    berlincam86 Member
    Messages: 59

    Thank you very much please have it. I need it badly. Thank you again. Please let me know. that is for a 350 right?
     
  10. berlincam86

    berlincam86 Member
    Messages: 59

    Just wondering If you found that pulley yet or not?
     
  11. LON

    LON Senior Member
    Messages: 749

  12. berlincam86

    berlincam86 Member
    Messages: 59

  13. smitty0904

    smitty0904 Junior Member
    from maine
    Messages: 4

    Im having a similar problem, I have a 88 v30 pickup w/454 (solid axle front end) and need the pulley and pump bracket.can I ask where you found the pump bracket?
     
  14. berlincam86

    berlincam86 Member
    Messages: 59

    i got my brackets from a fisher dealer. I still need the pulley. I do have the brackets and pulleys for a 454 i can sell you if you want them.
     
  15. snow7899

    snow7899 Senior Member
    Messages: 238

    Check on ebay, Do a search on fisher plow and the brackets are in the buy it now section.
     
  16. sweetk30

    sweetk30 PlowSite.com Addict
    Messages: 1,588

    storks on here and ebay has tons of old fisher live hydro pump parts. i got a complete minus pump and valve setup for my truck for 220 shipped. all hardware/new belt/new hoses/ all brackets with directions and crank pully.
     
  17. sweetk30

    sweetk30 PlowSite.com Addict
    Messages: 1,588

  18. smitty0904

    smitty0904 Junior Member
    from maine
    Messages: 4


    I dont think I can PM since im a new user, Id be interested.what year 454 do they match up with?
     
  19. berlincam86

    berlincam86 Member
    Messages: 59

  20. Theo Epstein

    Theo Epstein Member
    Messages: 59

    Any Fisher distributor should be able to order that for you. It's still an active part. If you ask for part number 20058, you get both the 20056 and 20057.