1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Fisher Plow Not scrapping

Discussion in 'Fisher Engineering Discussion' started by SilvaXXIII30, Dec 14, 2014.

  1. SilvaXXIII30

    SilvaXXIII30 Member
    Messages: 36

    Anyone have this issue?
    First snow storm of the year and my properties were the worse I had so many complaints. Because it left so much snow behind.

    My 2 Fisher Plow xls not scrapping down all the way, I noticed its from the rubber wing edges. They're a lot lower then the middle cutting edge. and when I plow , it bounces like crazy because its scrapping more on the rubber edges.

    Anyone have this problem?

    I was thinking of cutting them.
     
  2. kimber750

    kimber750 PlowSite Veteran
    Messages: 3,712

    Did you replace wing edges and not put a new center cutting edge on?
     
  3. SilvaXXIII30

    SilvaXXIII30 Member
    Messages: 36

    it's a brand new plow
     
  4. 1olddogtwo

    1olddogtwo PlowSite Fanatic
    Messages: 11,554

    Configuration is probably set wrong
     
  5. SilvaXXIII30

    SilvaXXIII30 Member
    Messages: 36

    what do you mean what kind of configuration?

    like how they put them on?
     
  6. 1olddogtwo

    1olddogtwo PlowSite Fanatic
    Messages: 11,554

    Who assembled the plow
     
  7. kimber750

    kimber750 PlowSite Veteran
    Messages: 3,712

    Is A frame level when plow is down?

    Blade comes assembled, now that doesn't mean Fisher didn't mess something up.



    May just need a bit of time to wear wing edges in. Go plow some dry pavement, that should wear it in pretty quick.
     
  8. Defcon 5

    Defcon 5 PlowSite.com Addict
    Messages: 1,706




    Set the plow on the ground......Are the wing edges set lower than the main cutting edge.......You might have to adjust the wing cutting edges.....The Plow will chatter at times until the edges wear in.....
     
  9. Defcon 5

    Defcon 5 PlowSite.com Addict
    Messages: 1,706





    All good points here....Make sure the A frame is as level as possible.....Three holes...Pick the one closest to level....
     
  10. SilvaXXIII30

    SilvaXXIII30 Member
    Messages: 36

    QUOTE=Defcon 5;1899768]All good points here....Make sure the A frame is as level as possible.....Three holes...Pick the one closest to level....[/QUOTE]
     
  11. SilvaXXIII30

    SilvaXXIII30 Member
    Messages: 36

    [/QUOTE]
    how do you post pictures on here I'm on my phone
     
  12. 1olddogtwo

    1olddogtwo PlowSite Fanatic
    Messages: 11,554

    What kind of phone
     
  13. SilvaXXIII30

    SilvaXXIII30 Member
    Messages: 36

    everything looks looks fine. I think it's just the plow you got to wear it down. I still think its a stupid design.

    yes the plow chatters because of the poly wings to low.

    I'm going to take them off and reinstall them again. Because I think the people who installed them never tighten then probably because I have another plow same one brand new and I'm assuming from the chattering while plowing two bolts came out and now I have a dangling Polly cutting edge.
     
  14. SilvaXXIII30

    SilvaXXIII30 Member
    Messages: 36

    Samsung note the first one
     
  15. SilvaXXIII30

    SilvaXXIII30 Member
    Messages: 36

    Kaminski's and son truck
    Buffalo New York
     
  16. SilvaXXIII30

    SilvaXXIII30 Member
    Messages: 36

    [/QUOTE]
    the a-frame looks leveled to the ground
     
  17. 1olddogtwo

    1olddogtwo PlowSite Fanatic
    Messages: 11,554

    Need to use Google Chrome

    image.jpg
     
  18. 1olddogtwo

    1olddogtwo PlowSite Fanatic
    Messages: 11,554

    New iPhone 6 will only allow one at a time my droid will allow me to do 5

    image.jpg
     
  19. 1olddogtwo

    1olddogtwo PlowSite Fanatic
    Messages: 11,554

    Apple hate it

    image.jpg
     
  20. SilvaXXIII30

    SilvaXXIII30 Member
    Messages: 36

    I just noticed there is a little play on the poly wing edges.
    like an oval shape so you can bring them a little more up or a little more down. by maybe a half inch.

    it looks like I have to extend the plow to the full length so I could get to the bolts and then while the plow is down to take out the bolts.and then I adjust them to ground level and then put the bolt back in.