1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Fisher plow lights

Discussion in 'Fisher Engineering Discussion' started by supersource, Mar 28, 2016.

  1. supersource

    supersource Junior Member
    Messages: 10

    I would like to replace my plow lights with something better .Can I just splice into fisher harness and use a trailer connector to replace plug.
     
  2. dieselss

    dieselss PlowSite Fanatic
    Messages: 10,977

    What lights do you have now?
    Why would you need to use a trailer plug?
     
  3. 1olddogtwo

    1olddogtwo PlowSite Fanatic
    Messages: 11,537

    Sure you could, but why?

    Why could you just reuse the harness you are using now and adapt new lights to that?

    Why not just do it right?
     
  4. chevyzrule810

    chevyzrule810 PlowSite.com Addict
    Messages: 1,239

    Agreed.Open the front of the lights.Write down what color goes where and cut wires from the lights.Squeeze the plastic grommet the wires go through and remove the wiring harness.My friend has a set of these on his plow,nice and bright and bulbs are replaceable.


    http://www.amazon.com/Truck-Lite-80...ds=plow+lights&refinements=p_6:A3RRY4HYYSYQNF