1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

fisher mm2

Discussion in 'Fisher Engineering Discussion' started by jtslawncare, Nov 13, 2013.

  1. jtslawncare

    jtslawncare Member
    Messages: 33

    hey guys I was hooking up the plows to make sure everything was in working order and the lever to release the pins on the plow weren't coming undo easy like usual so I put a little of muscle into it and snapped the lever off clean at the base:realmad:. plows 2 years old. didn't know if anyone else had this happen before? Thanks
     
  2. gtmustang00

    gtmustang00 Senior Member
    from Berlin
    Messages: 747

    Never had that happen. I keep all the pins lubricated.
     
  3. chevyzrule810

    chevyzrule810 PlowSite.com Addict
    Messages: 1,238

    Wow that's a lot of force on the lever.Always keep pins lubricated and change fluid
     
  4. jtslawncare

    jtslawncare Member
    Messages: 33

    I keep the fluid changed every year and pins lubed.. the plow was a little **** eyed from the support bar that attaches to mount being bent... one pin snapped in other one didn't and because of that I guess it put to much pressure on the driver side pin. Thanks for the reply guys