1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Fisher mm2 wiring question

Discussion in 'Truck & Equipment Repair' started by MetroProperties, Nov 14, 2014.

  1. MetroProperties

    MetroProperties Junior Member
    Messages: 26

    I have a 2006 ford f250 diesel. I have a 9 ft fisher xblade poly that goes on it and when I was putting the plow on last night the harness on the tuck side that the 2 prong plug goes into was heating up and began to smoke. My lights worked and I was only angle the plow to the right. Thinking it needs a new harness. What do you guys think
     
  2. LON

    LON Senior Member
    Messages: 749

    Had a customer with kind of the same issue. Ended up that the ground wire was broke in the middle of the power harness. Found the break when we wiggled the wire and heat & smoke broke through the covering. Replaced the power harness and fixed the problem.