1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Fisher MM2 Push Plates GM

Discussion in 'Used Plowing and Truck Equipment Forum' started by jmb49735, Aug 31, 2013.

  1. jmb49735

    jmb49735 Junior Member
    Messages: 12

    For 2001-2007 classic gm 2500hd 3500 trucks.$250
     
  2. bcramblit

    bcramblit Member
    Messages: 35

    Do you still have the push plates?
    Do you have a headlamp harness for that truck?
     
  3. jmb49735

    jmb49735 Junior Member
    Messages: 12

    Plates are still for sale. I do not have any wiring.
     
  4. bcramblit

    bcramblit Member
    Messages: 35

    Can you take some pics. I need to make sure I get the heavy duty ones with the double squares on each of the pin holes. I need these quick and I am very interested just need to make sure.
     
  5. jmb49735

    jmb49735 Junior Member
    Messages: 12

    Give me you email or cell # and I will snap a couple of pics for you. These should be the ones you want. I bought these with a 8'6" extreme v.
     
  6. brad96z28

    brad96z28 PlowSite.com Addict
    Messages: 1,526

    If they are 7169 wich they should be they fit 99 to 2010
     
  7. bcramblit

    bcramblit Member
    Messages: 35

    I have no doubt they will fit. I have seen two different styles though. I need the ones, with the reinforcement square welded to both sides of the pin hole on the mounting horns. Which actually makes them triple thick instead of just doubled. My plow weighs in at over 1100lbs, I need the heavier ones. I just want to confirm that they are the ones I need. Thanks guys!
    Please send the pics to
    cramblitconstruction@yahoo.com
    515-556-7078
     
  8. brad96z28

    brad96z28 PlowSite.com Addict
    Messages: 1,526

    All the new ones are made with the square on one side make no difference in how strong they are 2 in back the narrow pice is the same thickness. Push plates that fit the 550 trucks that run 1500 10ft mc plows are made that way It really doesn't matter.
     
  9. jmb49735

    jmb49735 Junior Member
    Messages: 12

    Pics sent to ur phone.
     
  10. bcramblit

    bcramblit Member
    Messages: 35

    I can believe that. I may, just be too particular for my own good. Thanks for the info!
     
  11. jmb49735

    jmb49735 Junior Member
    Messages: 12

    They are sold.
     
  12. bcramblit

    bcramblit Member
    Messages: 35

    I bought these last wed. and they just showed up at my door. They are in great shape. It was a great transaction and fast shipping. Thanks...