1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

fisher mm keeps melting solenoids?

Discussion in 'Fisher Engineering Discussion' started by CNYScapes, Dec 1, 2007.

  1. CNYScapes

    CNYScapes Senior Member
    Messages: 136

    I have a 7'6" mm and the solenoid keeps melting off the positive cable after about an hour of plowing. I put on a new solenoid and it is fine for another hour or so and it melts the plastic part of the solenoid on the positive side. Cant figure it out? Any ideas?
     
  2. Jerre Heyer

    Jerre Heyer Senior Member
    Messages: 948

    First a bad ground or one not to the negative of the battery.

    Second bad plow motor

    Third, sludge in the pump unit

    J
     
  3. CNYScapes

    CNYScapes Senior Member
    Messages: 136

    thanks, tomorrow I will double check and clean all the ground wires / connections and see if that helps