1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

fisher ht help

Discussion in 'Truck & Equipment Repair' started by fx4plowin, Nov 23, 2010.

  1. fx4plowin

    fx4plowin Member
    Messages: 47

    just installed my fisher ht on my 04 f150, worked great, and flawless. i decided to dismount completely and remount to make sure everything was still good, and low and behold i remount it and now the up, left, and right try to make the plow go towards the right, but will not completely go right like something is holding it back, but will not go in any other direction. any help?
     
  2. fx4plowin

    fx4plowin Member
    Messages: 47

    thanks for all the help...for anyone else that may have this problem, what had happened was when i installed it with the fuses supplied by fisher they were only 2amp fuses and when i was reconnecting the power and ground cable to the plow it was constantly popping the fuses. upon further research, they are supposed to be 10amp fuses, so i installed 2 10amp fuses and just like that everything is back to narmal and not blowing fuses when i reconnect the power supply