1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Fisher EZ V question

Discussion in 'Fisher Engineering Discussion' started by Brian Young, Sep 28, 2009.

  1. Brian Young

    Brian Young PlowSite Veteran
    Messages: 3,382

    We bought a older Fisher EZ V and ever since we hooked it up the right wing kicks back in little increments until its in full V position. Any ideas?
     
  2. MidcoastMainiac

    MidcoastMainiac Member
    Messages: 95

    On its own or when you are trying to cycle it back?
     
  3. basher

    basher PlowSite Fanatic
    from 19707
    Messages: 8,993

    start with lubrication;)
     
  4. Brian Young

    Brian Young PlowSite Veteran
    Messages: 3,382

    On its own. If I just leave it in "straight blade" mode the right side will start kicking back.
     
  5. MidcoastMainiac

    MidcoastMainiac Member
    Messages: 95

    My guess(emphisis on guess) is a selinoid problem. I believe there were some problems with the earlier v-plows in the selinoid bank.

    Anyone else remember this?
     
  6. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    Contaminated/damaged primary or secondary relief valve or a damaged/leaking pilot check valve on that wing. Have to pull them out and take a good look for damage or debris.