1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

fisher ez v just clicking from 3 plug module

Discussion in 'Truck & Equipment Repair' started by dbicorp, Feb 24, 2015.

  1. dbicorp

    dbicorp Junior Member
    Messages: 7

    My plow is about 5 years old and i do about 2 hours of plowing a storm so i don't have much use on the plow but after an hour the plow just stopped moving and i was getting a clicking from the 3 port module and it was making the headlights flash with the clicking. only way to stop it was to unplug the main power plug to the plow. plug back in, no clicking, use the control, started clicking again and had to go unplug again. any ideas? any one have this problem??
  2. bammbammfran

    bammbammfran Junior Member
    from USA
    Messages: 5

    4pin or 10 pin plug controller ?
    If a 4 pin, is it The plow module that is at the plow
    or the isolation module that is under the hood ?